Home > POLARIS RZR > RZR 900 | 900 S | 900 XC (2015)
Sort By:
Page of 1
Under Hood Accessory Fuse Block

Sloppy wiring jobs are ugly, potential safety hazards to you and your machine, and can damage your expensive accessories. The OEM accessory wire is too small and only has a 10 amp fuse. We have seen and had to fix a lot of bad wiring in our shop. Fixing these jobs and even installations were time consuming and difficult. We needed a way to make initial installation fast and easy, make future accessory installs simple, take extra load off the under-sized OEM wiring, and make it easily accessible for maintenance.

Our 12 fuse under-hood kit is that solution. Like the name says it provides room for 12 fused slots for accessories under your hood in a weather resistant body where they are easy to access and still protected from extreme conditions. The fuses are relayed so you get direct battery power without being able to accidentally leave something on and kill your battery. This fuse block is prewired to connect to the factory busbar and it is pre-assembled on the mounting plate so install is only 4 bolts to install.

You don’t have to settle for a tangled hazard under your dash. Now you can have a clean, professional looking fuse block in just a few minutes. Fits 2014+ RZR 1000, RZR900, RZR 900S, RZR 1000S RZR XP Turbo including RZRs with the digital display upgrade.

Our Price: $100.00
2015+ 900 4-Seat Conversion

2015+ 900 4-Seat Conversion

Our Price: $1,649.00
RZR 900s & XC 2 Seat Fastback Cage

Our 2-seat FastBack Cage is built with an integrated rear bumper. It is a direct bolt on, works with the stock doors, and adds strength, safety, and rigidity. Like all of our cages it is made with .095 wall DOM, fixture jig built, inert gas welded, with billet machined connectors and cups to insure a very strong connections. Our cages are 10" wider then the factory cages with a center bar in the roof; these two factors mean most of the accessories for the stock cage will not work.

Base cage price includes:
-Powder coating in standard colors for the cage
-Full roof made from 5052 .060 aluminum
-Powder coated roof in standard colors
-Front and rear (4-seat) grab handles
-3 rear flag/antenna mounts.

Standard powder coat colors include:
-Gloss Black
-Flat Black
-Gloss White
-Blue
-Orange
-Red
-Silver
-Bare metal also available upon request

Our Price: $2,100.00
1000 Front Tow Plate

1000 Front Tow Plate

Our Price: $65.00
1000 Front Bumper

1000 Low-Pro Front Bumper

Our Price: $250.00
RZR Front Tow Loop RZR Front Tow Loop

1000 Front Tow Loop

Our Price: $65.00
Zbroz Racing High Strength Lower & Upper Front A Arms Replacements for Polaris RZR 1000XP & 1000XP 4 kit allows you to replace the stock front a arms with a high strength, heavy duty replacement front A Arms ZBROZ RACING ERGO GRAB HANDLE AND LUG WRENCH

Assault RZR XP 1000 HEAVY DUTY RADIUS RODS - Barrel

Our Price: $84.95
Under Dash Relay Mount

Laser cut, aluminum mounting plate for electrical relays, or anything else you don't want bouncing around under you RZR dash.

Our Price: $20.00
Under Dash Amp Mounting Plate

Laser cut, aluminum mounting plate for a stereo amplifier, electrical relays, or anything else you don't want bouncing around under you RZR dash.

Our Price: $40.00
Carrier Bearing GEN2

U.S. patent pending Polaris RZR XP 1000 Carrier Bearing upgrade. One piece machined billet carrier bearing corrects drive line angle to solve issues for vibrations, chatter and failed OEM bearings. A MUST have for every RZR XP 1000 owner.

Our Price: $230.00
MOTOR MOUNT KIT

Sandcraft Motorsports New Billet motor mounts are the only solution for longevity and decreasing vibration while being rated to absorb the constant load of the motor and torque when under load.

Sandcraft Motorsports is the ONLY company that has integrated an upgraded motor mount design while decreasing the output shaft & operating angle that increases the slip yoke ability within the spline shaft movement. This allows less stress transferred into the drive line, the transmission's internal components, & decreases the amount of load on the clutches & belt for a longer life span.

Our Billet motor mount kit also includes the first ever billet front diff. shim kit, which decreases the input shaft and operating angles. This allows less stress on the front diff. ring & pinion gears, internal bearings & seals, & the front drive line u-joint, which creates longer life.

Also includes upgraded motor mount tube –

Race proven design to strengthen the front of the motor. Reducing movement under high stress situations which leads to potential harmful movement that can and will cause damage to your drivetrain. We added the top of the line materials with over double the wall thickness to ensure stability when under a load. Don’t be left in the dust with a broken motor or mount and potential frame damage and order one today!

Our Price: $385.00
Upgraded Greasable U-Joint Replacements

U.S. patent pending Polaris RZR XP 1000 Carrier Bearing upgrade. One piece machined billet carrier bearing corrects drive line angle to solve issues for vibrations, chatter and failed OEM bearings. A MUST have for every RZR XP 1000 owner.

Our Price: $20.00
Racer Driveline Collar

Our Patent Pending Racer Drive line Collar was designed for the extreme off-road riding conditions. ŒWith the stock drive line design using a slip yoke at the rear transmission output shaft while the motor is rubber mounted the drive line is constantly under pulling load. ŒThe stock drive line is pressed onto the stock carrier bearing and in extreme conditions will pull out and disable 4-wheel drive. ŒDon’t let this happen to you, our racer drive line collar can be used with the stock carrier bearing but is HIGHLY recommended with our upgraded GEN2 carrier bearing.

Our Price: $35.00
SpeedPanel Front Door Bags

Thermoformed inner panels that lock into the OEM door frame. This solid foundation allows greater storage within the door area and attaches with only 4 push style fasteners.

The panel is stylishly upholster to look great and be strong. Front area is a cushioned knee pad with a full length zipper that opens to a large storage area. This storage area includes a net pouch to keep smaller items from piling up on the bottom. There is also an additional padded pocket on the top, perfect for your phone and other small items that you don’t want packed in with everything else.

Sold as a pair.

Our Price: $190.00
SpeedPanel Rear Door Bags

Thermoformed inner panels that lock into the OEM rear door frame. This solid foundation allows greater storage within the door area and attaches with only 4 push style fasteners.

The panel is stylishly upholster to look great and be strong. Front area is a cushioned knee pad with a full length zipper that opens to a large storage area. This storage area includes a net pouch to keep smaller items from piling up on the bottom. There is also an additional padded pocket on the top, perfect for your phone and other small items that you don’t want packed in with everything else.

Sold as a pair.

Our Price: $190.00
6 Switch Billet Aluminum CNC Dash panel upgrade for your RZR XP 1000. 
This panel adds additional switches to your RZR for lights and accessories and gives you a very cool custom look. .50 CALIBER 6 SWITCH DASH PANEL (ONLY)

50 Caliber Black 6 Switch Dash & Switches

Our Price: $159.99
Custom 6 piece CNC Billet Aluminum Dash panel plates for your 2015 and up RZR with factory interactive digital display and GPS option, including XP 1000, S900, 900 Trail and 900 XC. 50 CALIBER 6 PIECE DIGITAL DASH PANELS (ONLY)

50 Caliber 4 Switch Dash Panel Black

Our Price: $224.99
50 CALIBER 6 SWITCH DASH WITH SWITCHES

50 Caliber Silver 6 Switch Dash & Switches

Our Price: $179.99
50 CALIBER RZR GAS CAP

Kawasaki Teryx Halo Cage

Our Price: $59.99
"Almost" Street Legal Kit by Ryco

Street Legal Kit

Our Price: $305.00
RZR Cage Extension Soft Top

Block the sun using the Vent Racing RZR top.

The Vent soft top for RZRs with a Vent Racing extension. This is a full top that covers both driver and passengers. It is made of industry leading durable, water repellent, UV resistant, ballistic canvas material. Hand sewn in USA, this top is extremely high quality and bears the Vent Racing Logo. Designed specific to our 4-seat conversion this soft top is the highest quality and has an a perfect fit.

Stay cool and dry with a soft top for your Polaris RZR.

Our Price: $250.00
Side Nets

These side nets for the 4-seat extension, keep your kids arms and hands inside the vehicle while keeping stray tree branches or rocks out. Safety first, these nets will help contain passengers and thereby help protect them in the event of any kind of dangerous situation. Clips on in minutes this convenient kit includes all the parts to get you running.

Our Price: $130.00
Seat Belt Bypass

Polaris RZR Seat Belt Bypass

Our Price: $12.50