Skip to content
RZR PRO XP
RZR TURBO S
RZR XP 1000 / TURBO
TRAILER | CHASE VEHICLE
Shop Our Categories
170 SUPER CLUTCH SET
Usually Ships in 24 to 48 Hours
This is a RACE ONLY KIT for the Polaris RZR 170! It is not recommended as a first upgrade. We recommend this kit for serious racers who have a full engine upgrade and that have a lot of time to test and tune. Each RZR is different as well as each driver and their preferences. We can not offer any help tuning this as there are too many variables. Again, if you don't have the time to test and tune, and experience tuning CVT clutches we do not recommend this kit. We will not be able to help you tune this over the phone. We won't even try.
Quicker acceleration, higher top speeds, and smooth operation. Ultralight balanced components, over-sized wear pads, and state of the art polytetrafluoroethylene (PTFE) coatings ensure superior performance and long service life. Fits both carburetor and EFI 170 models.
Ultralight gold specially coated overdrive variator
Ultralight outer drive face
Ultralight large shoe racing clutch
Ultralight drilled & vented clutch bell
Dual range secondary slider
18x14 10g roller weights
1000 RPM compression spring
Ball bearing compression spring seat
-Use a new belt with this kit
-Use graphite or Moly grease when assembling
-Be familiar with clutch tunning beforehand. This kit requires tuning. A lot of tuning. Hours of tuning. This kit is not for the faint of heart.
-Due to the many variables involved in tuning a clutch (elevation, temperature, humidity, driving style, and variations and modifications to machines, etc.)
we can not help you tune this
. You are on your own.
-This kit is recommended for racers because of the amount of work involved.
For optimal performance we recommend purchasing a range of springs and roller weights to help tune the clutch to you specific needs. The kit comes with a 1000rpm spring but we also offer a
. And we have a
roller weight tuning kit here
170 Ignition Coil
170 26mm Carb
170 AUTO-TUNE SYSTEM - GEN 4
170 Big Bore Kit
170 LIGHT CLUTCH BELL
Replacement Filter Cover for K&N Intake
170 MAGNETIC DRAIN PLUG
Share your knowledge of this product.
Be the first to write a review »
Copyright 2019 - Vent Racing